I always dread the “my tree is getting too big” question. Why do you think your tree is getting too big? One of the advantages of trees is they get big and give us shade in the summer. If a big tree is planted too close to a building there may be some concern about the damage which could be caused if it broke in a wind storm. A big tree under a power line may also be a problem. Otherwise, let the poor tree grow to its normal, God given height.

There are several reasons for pruning trees. Dead or broken branches should be removed back to their origin. Sometimes lower branches are removed up to 6 to 8 feet to allow access underneath. Branches can be thinned if they are crossing and rubbing against each other. Water sprout branches which grow straight up should be removed. When a tree which normally has a single trunk develops one or more upright branches which are near the same size and height of the central trunk, shortening them back to a side branch will give balance to the tree. This is particularly true if the side branches have a narrow crotch angle of less than 45 degrees.

If there is a good reason to shorten the height of a tree, the upper branches should be pruned just above a side branch which is at least one third the size of the branch being pruned.

Pruning all the upper branches to stubs at an arbitrary height is called “topping” and causes damage to trees which shorten their lives. Topped trees produce many small, weakly attached branches when they regrow from the stubs. These weak branches are easily broken off in a storm. The stubs often die back leaving an ugly open wound which is an invitation to rot.

Whenever a branch larger than 3 inches in diameter is removed, a collar should be left on the larger branch or trunk. A collar is a slight bulge near where the branch emerges from a larger branch or trunk. Large branches should be pruned in a 2 or 3 cut method. Make an undercut an inch or two beyond the final cut at the collar level. Then make a down cut an inch or two beyond the undercut. If the branch breaks before the second cut is all the way through, it will not tear the bark. Then, the final cut is made just above the collar to remove the stub.

It takes a long time to grow a tree. Lets not spoil a large tree by arbitrarily shortening its height.

March 6, 2015

“My Tree Is Too Big”

I always dread the “my tree is getting too big” question. Why do you think your tree is getting too big? One of the advantages of […]
March 6, 2015

How Big Will My Tree Grow?

I am continually amazed when trees which normally grow 50 feet or taller are planted under power lines or other places where there is not room […]
March 6, 2015

Mulches Reduce Weeds and Improve Plant Growth

One of the best ways to reduce weeding is to apply mulch around trees, shrubs, flowers, fruits, and vegetables. The most popular mulch material is bark. […]
March 6, 2015

Planting and Staking Trees

Holes for trees should be dug to the depth of the existing container or soil ball. Holes should be 1 ½ to 2 times the diameter […]
March 6, 2015

How to Prune (and not prune) Large Trees

Large trees growing near homes and other structures can be dangerous during windy weather, especially if they have wounds, rot or weak branch connections. However, far […]
March 6, 2015

Protect Trees from Stunting and Death by Trimmer

The line trimmer has become almost as common as the lawn mower for landscapers and gardeners. It gives lawns that finished touch with all the edges […]
March 6, 2015

Living Christmas Trees in Pots

Living trees and other plants can be decorated with Christmas ornaments and later be planted outside. This can become a family tradition where parents and children […]
March 6, 2015

Moving and Planting Trees and Shrubs

A common problem with almost all landscapes is to have plants installed which outgrow their space and intrude on walks, walls, or windows. January through March […]